Retry and serialize pineapd/hak5 calls, queue virtual-pager keys, and grey out buttons until the pager finishes. Deploy now installs python3-light after factory firmware. Bump version to 1.3.2.
Co-authored-by: Cursor <cursoragent@cursor.com>
- Env check is read-only when state is sane: no pineapd command-socket
writes, no live pool-list commits, no wifi reload; pineapd restarts only
when a runtime-sensitive UCI value changed or the daemon was down
- Failed monitor repairs now fail the startup contract instead of being
reported as fixed; runtime pool state is read from active config
- Enterprise AP recovery runs only on device boot (PAGER_WEBUI_BOOT), not
on every web-service restart
- serve() gates the HTTP port on startup checks with bounded retries and
shuts down cleanly on SIGTERM/SIGINT; the recon watchdog waits
interruptibly
- Recon uses a bounded userspace channel scheduler that drives both
monitor radios over non-DFS channels, with preflight verification,
serialized starts, and per-cycle error reporting
- payload.sh waits for real readiness on start, fully removes the boot
service (stop + disable + delete) on stop, and surfaces a
stopped-but-enabled boot service; deploy.sh refreshes the installed
init script even when the service is stopped
- Bump version to 1.3.1
Co-authored-by: factory-droid[bot] <138933559+factory-droid[bot]@users.noreply.github.com>
- STA uplink disable now uses uci commit + ip link set wlan0 down instead of
wifi reload, so the env check never bounces radios/APs/drops monitors
- Removed the wlan0mon 'hop is off' warning: field-verified hop=0 is normal
(wlan1mon also reports 0 while scanning both bands); the STA/AP pinning
checks are the real signals
- recon/status drops wlan0_hopping; UI keeps wlan0_sta + wlan0_pinned pills
The stock STA client interface (wlan0) holds phy0's channel, pinning wlan0mon
so 2.4GHz recon captures nothing (verified: iw set channel -> Resource busy
until wlan0 is down). env_check now disables it (uci wireless.dummy_radio0
disabled=1 + wifi reload) at startup and /api/recon/status exposes wlan0_sta
so the recon page can warn if it regresses.
The band UCI config looked correct but pineapd was not hopping wlan0mon at
runtime, so 2.4GHz recon results were entirely absent. env_check now parses
_pineap INTERFACE LIST and warns when wlan0mon hop is off; /api/recon/status
exposes wlan0_hopping and the recon scan bar surfaces it.
- env_check(): verifies daemon/pineapd/UCI/monitors/recon DB, auto-fixes
fixable issues and re-verifies; forces runtime SSID-pool broadcast off to
match the UI (kills the 'pool on but UI shows off' gap)
- server.py --env-check CLI; payload.sh runs it verbosely before starting,
aborts on core failure
- serve() runs the check at every startup (boot + procd respawn)
- /api/health exposes env report + pool_runtime; /api/recon/status exposes
wlan0_pinned (2.4GHz under-sampling warning); recon page warns when a
radio0 AP pins wlan0mon
- recon start failures now include the daemon reason in the UI error
- shared stabilization refactor (_stabilize_uci/PINEAPD_SAFE_UCI/_raise_monitors)
- tests: test_env_check.py (18) + health/recon updates
- Version 1.1 -> 1.2 in the hak5 manifest and MCP serverInfo.
- Removed leaked personal details from process docs: device root password,
the user's personal iPhone SSID (authorized-test target), the local
/Users/... checkout path, and the device IP where it appeared alongside
the password. Replaced with <device-password>, <authorized-test-ssid>,
<repo>, and <device-ip> placeholders.
bzuccaro
